Hardwood brown film materiales de construccion
1. Detail descreption of dynea glue film faced plywood:
1220*2440mm ,1250*2500mm ,915*1830mm
1.No wapping, no fracture,not out of shape , it can stay 24hours in boiling water.
2.Good performance and more turnover use time.
3.It is easy to take off the membrane;Time is only 1/7 of the steel mould.
4.Make the surface of concrete more smooth and beautiful,so it can be easy to make decoration and it also deduct the processing of plastering.
5.This can moderate and contact 30% time for a project.
6.Corrosion resistant and ir will nor pollute the surface of concrete.
7.It is good to keep performance warm,ia favorable to make constrution in winter.
8.Products can be made into warping plewood
9.It is better to nail,saw,drill than bamboo and steel mould,can it can be processed into different types.
Email: nnwymy at nnwymy.com Mobile:0086-13558482831
2. Main prossesing for making dynea film faced plywood :
1) Raw material prepare (make sure it is dry enough, if not dry , hot press it to dry)
2. Sewing the veneer for making the three or four pcs veneer together,more strong
3.Glue the plate after sewing
4. composing the plate
5.Cold Press by press machine
6. Patching the plate after cold press
7.Hot press cutting and sanding
8.Coated the waterproof glue on the tree nodes
9.Film the plate / Finished products
10.Pick up inferior -quality products / glue the plywood edge with waterproof glue
11.Packing with the mdf pallet
12.Test the film faced plywood quality with the boiled water
13. The plywood after testing without any separated
Should you have any enquiries, welcome to send us email nnwymy at nnwymy.com,
Our team will get back to you with our best service!
Welcome to visit our factory at any of your convenient time!